USA Manufacturer & Market Leader

Click on the ASI logo to return to the home page.

Specifications

Environmental Conditions

  • Indoor Use
  • Main Supply Voltage: Fluctuations not to exceed ± 10% of nominal voltage
  • Altitude:   Up to 2000m
  • Temperature:   5°C to 40°C, may vary depending on reagent temperature requirements

Recommended Environmental Conditions

  • Operating Temperature:   18 - 35°C
  • Operating Humidity: Less than 85% recommended

General Specifications

  • Min. and Max. Volume:   2 µL - 1.95 ml
  • Precision for volumes <5 µL:   <2.5% CV
  • Precision for volumes >5 µL:   <1% CV
  • Maximum number of reagents:   Typically 27 to 44
  • Standard reagent rack:   27 positions, other configurations optional
  • Reaction vessel:   Standard microwell plates or strips

Incubator Specifications

  • Incubation timing is software controlled and automatically optimized
  • Plate/Well 25°C, 37°C, or ambient temperature
  • Plate shakes automatically with testing

Physical Specifications

  • 34” W x 20” L x 16” H Approx weight 77 lbs.
  • 66cm W x 51cm L x 40cm H Approx. weight 35kg

Power Supply

  • Voltage Range:   100 - 250VAC
  • Frequency Range:   50 - 60Hz
  • Power Maximum:   160W
  • Installation Category:   CAT II

Reader Specifications

  • Reads bichromatic absorbance
  • 4 position filter wheel: 405, 450, 492, 630 nm or custom
  • Linear Range:   -0.2 - 3.0A
  • Photometric Accuracy
  •  ± (1% of the reading +0.005A from 0 to 1.5A)
  •  ± (2% of the reading +0.005A from 1.5 to 3.0A)

Hardware

  • Contact ASI for current computer specifications prior to purchase.

Washer Specifications

  • 8-probe, automatic prime and rinse
  • Wash protocols are user programmable for aspirate, dispense, soak, mix
  • Wash volume buffer range:   25 - 500 µL
  • Wash may be set to repeat for a maximum ten times
  • Soak time setting may be set from 0 - 60 seconds

 

34"

16"

20"

Footer grey bar. Contains copy right mark.

© 2017 Arlington Scientific, Inc.™ All Rights Reserved

Rev. 03_2016  CR1134

Thirty years of service logoFounded in 1985, ASI’s customers have always been our number one priority. Customers receive professional support fr
Arlington Scientific Inc, Laboratory Equipment & Supplies, Springville, UT
Made in the USA logo - self certified